| Welding Power Source Type |
DT-300P (CE-Marking) |
| Rated Input Voltage |
400V ± 15% |
| Number of Phase |
3 Phase |
Single Phase |
| Rated Input |
TIG: 10.1kVA (8.1kW), Stick: 11.5kVA (9.2kW) |
TIG: 8.7kVA (7.6kW), Stick: 8.5kVA (5.9kW) |
| Rated Duty Cycle |
40% |
| Range of Rated Output Current |
TIG: 4 - 300A, Stick: 10 - 250A |
TIG: 4 - 250A, Stick: 10 - 180A |
| Rated Load Voltage |
TIG: 22V, Stick: 30V |
TIG: 20V, Stick: 27.2V |
| Max. No-Load Voltage |
58 V |
| Initial Crater Filler Current |
TIG: 4 - 300A, Stick: 10 - 250A |
TIG: 4 - 250A, Stick: 10 - 180A |
| Pulsed Current |
TIG: 4 - 300A, Stick: 10 - 250A |
TIG: 4 - 250A, Stick: 10 - 180A |
| Based Current |
TIG: 4 - 300A, Stick: 10 - 250A |
TIG: 4 - 250A, Stick: 10 - 180A |
| Gas Pre-Flow |
0.1 - 20s |
| Gas Post-Flow |
0.1 - 20s |
| Up-Slope |
0.1 - 10s |
| Down-Slope |
0.1 - 10 s |
| Pulse Frequency |
0.1 - 500s |
| Pulse Width |
50 (Possible to change by Function Key 5 - 95%) |
| Crater Filler Control |
[On] [Off] [Repeat] change type |
| Arc Spot |
0.1 - 10s |
| The Numer of Job Memory |
30 |
| Dimensions (W x D x H) |
250 x 640 x 395mm (without carrying handle) |
| Weight |
30kg |
| Start Type |
High frequency start/ Lift Start |
| Welding Torch Type |
AWD-26 |
AWD-18 |
| Rated Current |
200A (DC), 160A (AC) |
300A (DC), 260A (AC) |
| Rated Duty Cycle |
50% |
100% |
| Cooling Method |
Air-cooled |
Water-cooled |
| Electrode Size |
(0.5mm), (1.0mm), (1.6mm), (2.0mm), 2.4mm, (3.2mm), (4.0mm) |
| Cable Length |
4m or 8m |